Sticking a printed banner securely and effectively depends on the type of surface and the environment in which the banner will be displayed. Here are several methods for sticking a banner to different surfaces:
Materials Needed
- Printed banner (preferably with grommets)
- Adhesive materials (double-sided tape, adhesive hooks, Velcro strips, etc.)
- Measuring tape
- Cleaning supplies (if needed for surface preparation)
1. Double-Sided Tape or Adhesive Strips
Ideal for smooth, flat surfaces such as walls or windows.
Steps:
- Clean the Surface: Ensure the surface is clean and dry. Remove any dust, dirt, or grease.
- Apply Tape/Strips to Banner: Attach the double-sided tape or adhesive strips to the back edges of the banner.
- Position the Banner: Hold the banner up to the desired location and ensure it is level.
- Press to Stick: Firmly press the banner against the surface, starting from one side and working your way to the other to avoid bubbles or wrinkles.
2. Adhesive Hooks or Command Strips
Suitable for walls, windows, or other flat surfaces. These are especially useful for temporary installations as they can be removed cleanly.
Steps:
- Clean the Surface: Ensure the surface is clean and dry.
- Attach Hooks/Strips: Follow the manufacturer’s instructions to attach the adhesive hooks or command strips to the surface.
- Hang the Banner: Use the grommets or holes in the banner to hang it on the hooks or strips.
3. Velcro Strips
Useful for fabric surfaces or when you need to frequently remove and reattach the banner.
Steps:
- Attach Velcro to Banner: Stick one side of the Velcro strip to the back corners of the banner.
- Attach Velcro to Surface: Stick the matching Velcro strips to the surface where you want to display the banner.
- Press to Secure: Press the Velcro strips on the banner to the strips on the surface to secure the banner in place.
4. Grommets and Bungee Cords/Zip Ties
Ideal for outdoor installations on fences, poles, or other structures.
Steps:
- Measure and Mark: Measure the distance between the grommets on the banner and mark the corresponding points on the surface or structure.
- Attach Cords/Ties: Thread bungee cords or zip ties through the grommets and around the structure (e.g., fence or pole).
- Secure the Banner: Tighten the cords or ties to secure the banner in place. Ensure it is taut to prevent flapping in the wind.
5. Suction Cups with Hooks
Great for glass surfaces such as windows.
Steps:
- Clean the Surface: Ensure the glass surface is clean and dry.
- Attach Suction Cups: Place the suction cups on the glass at the desired locations.
- Hang the Banner: Use the grommets to hang the banner on the hooks attached to the suction cups.
Tips for Effective Installation
- Surface Preparation: Always clean and dry the surface before attaching the banner to ensure maximum adhesion.
- Check Alignment: Use a level or measuring tape to ensure the banner is straight.
- Secure Corners: Pay extra attention to securing the corners to prevent the banner from curling or flapping.
- Weather Considerations: For outdoor banners, ensure they are securely fastened to withstand wind and weather conditions. Consider using wind slits if the banner is particularly large.
By following these steps and choosing the appropriate method for your specific situation, you can effectively stick a printed banner to various surfaces.
